GW INSTEK Real-time/ Digital Storage Oscilloscopes GRS-6000A Series

Real-time/ Digital Storage Oscilloscopes GRS-6000A Series Features GRS-6052A: DC~ 50MHz Bandwidth, 100MSa/ s, 2kW/ CH x 2 GRS-6032A: DC~ 30MHz Bandwidth, 100MSa/ s, 2kW/ CH x 2 Equivalent Time Sampling of 500MSa/ s max. Acquire Mode : Peak Detect, Envelop, Persistence Pre-Trigger Function 0 ~ 10 div ROLL Mode to 100s/ div Waveform SAVE/ RECALL 10 sets ( REF0~ REF9) Averaging Function ( 2 ~ 256) Smoothing Function ON/ OFF Max. Sweep Rate 10ns/ div ALT-MAG Function ( x5, x10, x20) Cursor Readout Function: ³ V, ³ T, 1/ ³ T Panel Setting SAVE/ RECALL 10 sets ( M0~ M9) VERT Mode Triggering RS-232C Interface MODEL : GRS-6052A Type and Acceleration : 6-inch CRT, 10kV MODEL : GRS-6032A CRT Type and Acceleration : 6-inch CRT, 2kV Illumination Front panel control Z-axis Input Sensitivity : at least 5V Polarity : positive going input decreases intensity Max. input voltage: 30V( DC+ ACpeak) Input Impedance : approx. 33k© Input Impedance : approx. 47k© VERTICAL SYSTEM Deflection Coefficient and Accuracy 1mV ~ 2mV/ div ± 5% , 5mV ~ 20V/ div ± 3% , 14 steps in 1-2-5 sequence Variable Continuity 2.5 : 1 ~ min. 50V/ div Bandwidth ( -3dB) 1mV ~ 2mV/ div: DC~ 7MHz 5mV ~ 20V/ div: DC~ 50MHz 1mV ~ 2mV/ div: DC~ 7MHz 5mV ~ 20V/ div: DC~ 30MHz Vertical Mode CH1, CH2, DUAL ( ALT or CHOP) Chopper Frequency Approx. 250kHz Sum or Difference CH1+ CH2, CH1-CH2 Invert CH2 Input Impedance 1M© ± 2% / / approx. 25pF Input Coupling AC, DC, GND Input Voltage Max. 400V( DC+ ACpeak) HORIZONTAL SYSTEM Sweep Time 0.2¼ s/ div ~ 0.5s/ div, 20 steps Variable Continuity 2.5 : 1 up to 1.25s/ div ( uncal.) Accuracy ± 3% , ± 5% at x5/ x10MAG. ± 8% at x 20MAG Sweep Magnification x5, x10, x20 Max. Sweep Time 20ns/ div ( 10ns/ div uncal) 50ns/ div ( 10ns~ 40ns/ div uncal) ALT-MAG Function Yes HOLD-OFF Time Variable TRIGGER Trigger Mode AUTO, NORM, TV Trigger Source VERT, CH1, CH2, LINE, EXT Trigger Coupling AC, HFR, LFR Trigger Slope “ + ” or“ - ” polarity ALT Trigger Yes Indicator Trigger LED Yes TV Sync. Separator TV-V“ -” , TV-H“ - ” Trigger Sensitivity GRS-6052A 20Hz~ 5MHz 5MHz~ 40MHz 40Hz~ 50MHz GRS-6032A 20Hz~ 2MHz 2MHz~ 20MHz 20Hz~ 30MHz CH1, CH2 0.5div 1.5div 2.0div Vert-Mode 2.0div 3.0div 3.5div EXT 200mV 800mV 1V TV sync. pulse more than 1 div or 200mV ( EXT) External Trigger Input Input impedance : Approx. 1M© / / 25pF ( AC coupling) Max. input voltage : 400V ( DC + ACpeak) X-Y OPERATION Input X-axis : CH1 ; Y-axis : CH2 Sensitivity 1mV/ div ~ 20V/ div Bandwidth X-axis : DC ~ 500kHz ( -3dB) X-Y Phase Shift 25ns) , Envelop. Persist, Average( 2~ 256) Operation Mode Auto, Norm, Single, Single-roll, Roll, X-Y, Run/ Stop Smoothing Function Dot joint ON/ OFF selectable Pre-Trigger Pre-trigger 0 ~ 10div in 0.02div steps X-Y Operation X-axis: CH1 Y-axis: CH2 Storage Bandwidth DC~ 50MHz( -3dB) Display Resolution H: 100points/ div; V: 25points/ div; X-Y: 25 x 25 points/ div SAVE/ RECALL Panel Setting 10 sets( M0 ~ M9) Waveform 10 sets( REF0~ REF9) READOUT & CURSOR Cursor Measurement ” V, ” T, 1/ ” T Readout Intensity Adjustable OUTPUT SIGNAL CH1 Signal Output Voltage : approx. 20mV/ div ( with 50© terminated) Bandwidth : 50Hz ~ 5MHz Calibrator Output Voltage : 0.5V± 3% Frequency : approx. 1kHz, square wave INTERFACE RS-232C POWER SOURCE AC 100V/ 120V/ 230V± 10% , 50/ 60Hz